Featured
- Get link
- X
- Other Apps
Putting Up Shelves In Plasterboard
Putting Up Shelves In Plasterboard. I found these worked well and have used them for putting up speaker brackets and floating shelves. If the unit you are putting up is heavy, ask for help.

You'd be better off using brackets that can be adjusted so each bracket can be screwed into a stud. This guide shows you how to put up a simple but sturdy she. Make sure you use all of the correct equipment and materials, and ask for advice at your local hardware store if you need help picking out the right materials.
Putting Shelves Up On Hollow Plasterboard Walls.
Ensure it is the right way up, with the screw holes at the bottom. You'd be better off using brackets that can be adjusted so each bracket can be screwed into a stud. The best way for me to ensure the assembly is nicely level is to fix one part of the unit, shelf or similar on one end, make sure the shelf/units are level (using spirit level) then mark the other hole onto your plasterboard.
It's Like They Are Scattered.
There is still a limit on the load though due to the strength of the plasterboard. Hopefully the studs will be in the right places. To put up a shelf on a plasterboard wall, you will need to find two studs (a stud is the upright wooden support in the wall to which the plasterboard is attached) to anchor your shelf brackets.
Unless You Can Screw Them Into A Stud Or Something Solid Behind The Plasterboard Don't Bother Trying To Put A Floating Shelf On A Plasterboard Wall.
I have those twin bracket shelves. Your screw will need to be 62mm plus the distance from the face off the plasterboard. Putting up shelves is a brilliant way to save valuable floor space and show off items like vases, family photographs and books.
I Found These Worked Well And Have Used Them For Putting Up Speaker Brackets And Floating Shelves.
How to hang floating shelves on a plasterboard wall. Here you will be able to see how you can fix a floating shelf onto a plasterboard wall, using x4 red 18mm gripits. This guide shows you how to put up a simple but sturdy she.
Turn The Screw Into The Plug A Couple Off Turns Then Knock It Through 25Mm Into The Solid Wall.
Mark the top of the support on the wall. You could either use these plugs with long screws, which are long enough to bridge the gap and set into the brickwork. It's almost worth removing the plasterboard where your shelf support will go and building a wooden frame behind them.
Popular Posts
Clothes Hanging Rail For Sloping Ceiling
- Get link
- X
- Other Apps
Comments
Post a Comment